Woolly Jumpers! Rabbit and Lamb amigurumis

I was asked to make some toys for our school's Easter raffle and so I picked two of the animals I most associate with spring - rabbits and lambs. I've been wanting to come up with a pattern for animal toys wearing clothes, so this was a good opportunity to give it a try. I started with a boy rabbit wearing a jumper (or sweater), then made the boy lamb with a really stripy jumper (I love stripes!).

Since I have boys I don't usually make girly toys, but I thought I'd give it a go this time and made a girl rabbit and lamb wearing little dresses, which made a nice change for me.

When I started making them the weather was still quite wintery, but but by the time I got round to photographing them it was getting much more spring-like, and I was pleased to be able to use some daffodils and primula as a backdrop.

The pattern, which gives instructions on how to make all the variations, is available in my Etsy shop.

Obi-Wan Kenobi - Mini Amigurumi

I've just finished my latest Star Wars amigurumi figure - Obi-Wan Kenobi. So far I've only done characters from the Original Trilogy, so I made a little mini version of old Ben Kenobi, complete with a brown hooded robe.

I'd forgotten, until I rewatched Episode IV, quite how much I liked the character, but Sir Alec Guinness did a great job, bringing a lot of class and gravity to the whole film, and he gets some great lines. When Ewan McGregor was cast in the prequels I was pleased, as he's a decent actor (who's very easy on the eye!), and he did a good impression of Guinness which helped connect the new films to the old. With that in mind, I thought I'd make his version of the character too. The pattern is written with just a few variations - old Obi-Wan wears a long robe whereas young Obi-Wan has a shorter one so you can see his trousers and boots, and obviously the hair colour is different.

I was very pleased with how the hooded robe turned out. Nearly all the crochet I do these days is amigurumi in the round, so it was a bit different making something in rows. I was worried that something so small would end up far too stiff, but it worked just fine. I might even try making a version of Yoda from the prequels with a little hooded robe.

The pattern, including both versions of Obi-Wan, is now available in my Etsy shop.

Boba Fett - Mini Amigurumi

I was delayed a bit by Christmas, but I've finally finished my pattern for a miniature Boba Fett. This bounty hunter with the fearsome reputation is only 3.5" tall, and the pattern to make him is available in my Etsy shop.

It was difficult to get his helmet right, but in the end I was very happy with it. It was also hard to find the right colour for his armour - every photo I looked at for reference looked slightly different, and for my first prototype I used an olive green. Then I found this colour, I would describe it as a sage green, which I think works well. I decided against making his rocket backpack, because I felt it would overwhelm him, given his size, but he had to have his little ragged cloak.

I'm hoping to come up with a few more Star Wars characters - I'm working on Obi Wan Kenobi at the moment, then I think I'll have a go at Admiral Ackbar and a Jawa.

***Latest news July 2014***

This pattern is no longer available for sale, as it is going to be included in a new Star Wars crochet book, due to be published Spring 2015.

....And The Pussycat

Here's the pattern to make a tiny little cat - only 1.5" tall - that's the perfect pet for my mini amigurumi Witch. Make in the traditional black, or use and colours you like for a different type of cat.

See the previous post for general instructions and abbreviations for the pattern, and details on how to make a mini owl.

Witch's Cat

You will need:
Small amount of black yarn.
1 Pair of 7.5mm green safety eyes, or green yarn to embroider them.
Small amount of stuffing.
3.5mm (E) hook.

Special stitch instructions:
3 dc pop: popcorn stitch for ears. Work 3 dc into 1 st, take hook out leaving loop, put hook through 1st dc & pull loop through.

Start at top of head:
Round 1: Ch2, work 6 sc into 1st ch - 6 st.
Round 2: 2 sc in each st around – 12 st.
Round 3: [2 sc in next st, sc in next st, 2 sc in next st, 3 dc pop in next st, 2 sc in next st, sc in next st] 2 times - 18 st.
Round 4 - 7: (4 rounds) Sc in each st around – 18 st.

Fit eyes between rounds 5 and 6, treating the start of the round as the back of the cat.

Round 8: [Sc2tog, sc in next st] 6 times – 12 st.
Round 9: [2 sc in next st, sc in next st] 6 times – 18 st.
Round 10 - 13: (4 rounds) Sc in each st around – 18 st.
Round 14: Sc in each st around until you get to the middle back, [tail: ss in next st, ch 10, ss into 2nd ch from hook, ss in next 8 ch, ss back into original st], sc in each st to the end of the round – 18 st.
Round 15: Sc in each st around (work into the first ss of the tail, not the second) – 18 st.
Round 16: [Sc2tog, sc in next st] 6 times – 12 st.
Round 17: [Sc2tog] 6 times – 6 st.

FO, leaving a length of yarn. Embroider eyes if you haven't used safety eyes. Stuff and use length yarn to sew up hole at bottom, pulling it tight up through the body to ensure that the cat will sit on a flat surface.

The Owl.....

After I'd designed my Witch and Wizard amigurumis, I felt that they could both do with little pets, or familiars. So I made the witch a little black cat (pattern in the next post) and made a mini snowy owl for the wizard. Of course, when I started taking photos of them, I realised that I'd made the Owl and the Pussycat!

These guys are pretty small, only about 1.5" tall, so that they match with their owners. Even if you don't have a witch or wizard to make them for, they'd still be cute little mini pets. Maybe I'll take my tiny Hedwig to see Harry Potter and the Deathly Hallows!

General instructions for both patterns:

Work in rounds unless otherwise stated and do not join rounds unless told to. Use a stitch marker to mark the start of a round - a small piece of different coloured yarn placed under the stitch at the start of the round will do. To start a round, you can use the magic ring method, but I prefer (ch2, work 6 sc into 1st ch). If you work the 6 sc over the tail of yarn as well you can use that to pull the hole tight.

Work through both loops of stitches unless otherwise indicated.

Abbreviations:
ch = chain
st = stitch or stitches
ss = slipstitch

sc = single crochet (US), double crochet (UK)

dc = double crochet (US), treble crochet (UK)
tog = together
sc2tog = decrease by working two sc together

FLO = work in front loop only

FO = fasten off

Wizard's Owl

I have made a snowy owl here but you could use different colours to make a different type of owl.

You will need:
Small amount of white yarn.

Small amount of black yarn for beak.

1 Pair of 7.5mm amber safety eyes.

Small amount of stuffing.

3.5mm (E) hook.

Start at top of head:

Round 1: Ch2, work 6 sc into 1st ch - 6 st.

Round 2: 2 sc in each st around – 12 st.

Round 3: [2 sc in next st, sc in next st] 6 times - 18 st.
Round 4 - 7: (4 rounds) Sc in each st around – 18 st.

Fit eyes between rounds 5 and 6, treating the start of the round as the front of the owl.

Round 8: [Sc2tog, sc in next st] 6 times – 12 st.
Round 9: [2 sc in next st, sc in next st] 6 times – 18 st.
Round 10 - 13: (4 rounds) Sc in each st around – 18 st.

Find the stitch in the last round that is exactly in the middle of the back of the owl. Count back 5 stitches along the round (not including the middle stitch) and mark this stitch.

Round 14: Sc in each st around until you get to the marked stitch, [FLO sc in next st, hdc in next 2 st, dc in next 5 st, hdc in next 2 st, sc in next st], working through both loops again sc in each st to the end of the round – 18 st.

Round 15: Sc in each st around (work into the back loops of the st in the previous round that were in FLO) – 18 st.

Round 16: [Sc2tog, sc in next st] 6 times – 12 st.

Round 17: [Sc2tog] 6 times – 6 st.

FO, leaving a length of yarn. Using black yarn sew a beak. Stuff and use length yarn to sew up hole at bottom, pulling it tight up through the body to ensure that the owl will sit on a flat surface.

Free Pattern: Tiny Rabbit Amigurumi

Here's a simple little pattern to crochet a tiny rabbit, about 2" long. You crochet the ears and the feet as you go along, so the only sewing is for the features and the tail.

(This pattern has been kindly translated into German by Steffi, you can find it on her blog)

Tiny Rabbit Amigurumi

Abbreviations:
ch = chain
st = stitch or stitches
ss = slipstitch
sc = single crochet (US), double crochet (UK)

dc = double crochet (US), treble crochet (UK)

tog = together

sc2tog = decrease by working two sc together
FO = fasten off

General instructions:

Work in rounds unless otherwise stated and do not join rounds unless told to. Use a stitch marker to mark the start of a round - a small piece of different coloured yarn placed under the stitch at the start of the round will do. To start a round, you can use the magic ring method, but I prefer (ch2, work 6 sc into 1st ch). If you work the 6 sc over the tail of yarn as well you can use that to pull the hole tight.

Work through both loops of stitches unless otherwise indicated.

You will need:

Small amount of light brown yarn.
Small amount of white yarn.

Black yarn for features.

Small amount of stuffing.
3.5mm (E) hook.

Special stitch instructions:
4 dc pop: popcorn stitch for legs. Work 4 dc into 1 st, take hook out leaving loop, put hook through 1st dc & pull loop through.

Body:
Start at nose using light brown yarn.
Round 1: Ch2, work 6 sc into 1st ch - 6 st.
Round 2: [2 sc in next st, sc in next 2 st] 2 times – 8 st.
Round 3: Sc in each st around - 8 st.
Round 4: [2 sc in next st, sc in next st] 4 times – 12 st.
Round 5: Sc in next 4 st, [ear: ss in next st, ch 6, sc into 2nd ch from hook, dc in next 3 ch, sc in next ch, ss back into original st], sc in next 2 st, [ear: as before], sc in next 4 st – 12 st.
Round 6: Sc in each st around (work into the first ss of the ears, not the second) - 12 st.
Round 7: Sc in next 4 st, [2 sc in next st, sc in next st] 3 times, sc in next 2 st – 15 st.
Round 8: Sc in next 4 st, [2 sc in next st, sc in next 2 st] 3 times, sc in next 2 st – 18 st.
Round 9: 4 dc pop in next st, sc in next st, 4 dc pop in next st, sc in next 15 st – 18 st.
Round 10 - 11: (2 rounds) Sc in each st around - 18 st.
Round 12: Sc in next 17 st, 4 dc pop in next st – 18 st.
Round 13: Sc in next 4 st, 4 dc pop in next st, sc in next 13 st – 18 st.
Round 14: Sc in each st around - 18 st.
Round 15: [Sc2tog, sc in next st] 6 times – 12 st.

Round 16: [Sc2tog] 6 times – 6 st.

FO, leaving a length of yarn.

Use black yarn to sew eyes, nose and mouth, stuff and use length of light brown yarn to sew up hole at bottom.

Tail:

Using white yarn.

Ch 3, work 6 dc into 1st ch, join to first dc with ss. FO leaving a length of yarn and sew to bottom. Use the length of white yarn to sew front teeth if you wish.

Witches and Wizards

Fantasy has always been my favourite genre of books and films, so I thought I'd design some cute lttle amigurumis of various classic fantasy characters. Given that it's nearly halloween it seemed like a good idea to start with witches and wizards.

There are lots of great books featuring witches and wizards - Terry Pratchett's Discworld books have brilliant witches like the formidable Granny Weatherwax and the young but powerful Tiffany Aching, and Unseen University is home to a wonderful collection of  bickering wizards. One of the great things about the Harry Potter books is the fun J K Rowling has with all the eccentric characters in their amazing outfits and Tolkien, of course, created a classic and iconic character with Gandalf, the archetypal old, wise wizard.

One of my favourite books when I was little was The Witch Family by Eleanor Estes (if you've never heard of it you can take a look at some of it here: http://tiny.cc/wpl9p). It has lovely line drawings by Edward Ardizzone of a little witch girl, and the most adorable witch baby, which were definitely an inspiration for my designs.

My pattern is now for sale in my Etsy shop - and with it there are instructions for all the variations to make a mini witch or  wizard (just 4.5" tall) with several different looks.